Wed. Jan 19th, 2022

Four Great Options for Paneling Wood for Your Log Cabin

4 min read

Log cabin construction has advanced significantly over the past few decades. Log cabin living is a popular option for many. However, log siding has caught up to full log usage and could surpass it in the coming years. A strong trend is half-log siding or quarter-log siding for the cabin’s exterior and paneling inside. There are four main types of wood paneling that can be used to cover your log cabin ceiling and walls.

Pine paneling is very popular.

Knotty Pine is a popular wood paneling option for interior walls of log cabins and homes. It is easy to install on walls, but many homeowners also use it for ceilings. Its rustic beauty can be hard to miss, no matter where it is installed. Pine is used for:

  • Natural knots in the wood give it a multicolored appearance.
  • Its character is derived from its varied lines and mineral streaks.
  • Pine is more abundant than other types of wood, and it is also sustainable.
  • Knotty pine is very good at stains and finishing.
  • This wood is affordable for almost any budget.
  • Knotty pine paneling is a great choice for log cabins or homes of any size.

For hundreds of years, pine paneling has been common wallboard. You can install it horizontally, vertically or diagonally. It is possible to create unique patterns on walls and ceilings. Your imagination is your guide.

Barn Wood Applications are Growing

Barn Wood has become a popular type of wood paneling. It’s made from real wood and looks aged. Reclaimed wood has its problems, which we will address here.

  • Barn wood is getting scarcer, and it isn’t sustainable.
  • Reconditioning walls and ceilings can be costly.
  • Old wood may contain toxic chemicals, insects, nails and staples.
  • You must rip the barn wood to a consistent width and then cut it to length.
  • Some wood is cupped and not flat.
  • These issues can be solved, and you’ll love it.

Modern milled Barn Wood is made of Pine and Cedar. It looks like natural barn wood. It doesn’t have any of the above issues. It is non-toxic and does not contain splinters. This material can be made to look like old wood with a smooth surface or deeply weathered.

Cedar is another great option.

Some homeowners prefer Cedar because of its unique characteristics. Because:

  • It can have two colors, one from the sapwood and the other from the heartwood. The sapwood is lighter and more neutral, while the heartwood is reddish-brown.
  • Cedar paneling is unique in its aroma.
  • It is naturally resistant to insects and moisture.

Cedar paneling is slightly more expensive than Knotty pine. It will provide benefits that other woods cannot match.

Cedar paneling can also be used with a tongue-and-groove system and an end-matching locking system. This paneling is usually made from Northern White Cedar. It is available in three sizes: 4″, 5″, and 6″. It also comes in three-quarters inch thickness.

Pre-finished Paneling is Fastly Put Up

Installing pre-finished panels is easy and fast because the millwork company handles most of the work. The millwork company’s finishers sands and finishes the wood with stain or the final clean coat. They can also apply insect repellants to the finished material.

To seal and eliminate shrink lines, top companies apply the finish all around the edges and sides of the wood. It is much easier and quicker to finish the work in the millwork’s finishing area than it is in your home. Technicians do a better job and create a durable, non-yellowing sheen. It appears glassy smooth. The boards are sanded in between coats to give the paneling a furniture-like finish.

Pre-finished Knotty pine paneling can be ordered in 4″ to 5″, 6″ and 8″ widths. Pre-finished Cedar paneling can only be ordered in 6″. Both types of wood are 3/4″ thick. The company says, “Nail the thing up, and it’s done.” Think about the time and effort you will save by having someone else finish the job.

Tongue and Groove with End Matching

For easy installation, you can order any of these paneling styles with tongue-and-groove sides and ends. They come in convenient lengths, so there is almost no wasted wood. The end joints can be connected between the studs because they lock together. You don’t need to join the panels together by splicing them.

Where to find great looking paneling

The Woodworkers Shoppe offers a wide range of wood panels and accessories. They have many types of wall paneling, and they are America’s top log siding and log home product specialists.

Leave a Reply

Your email address will not be published. Required fields are marked *

Categories

Copyright © Woodland House | Newsphere by AF themes.